How To Install A Blade Guard On Craftsman Table Saw? A Quick Guide

While woodworkers can’t work without table saws (obviously), they’re pretty dangerous without blade guards. To learn how to install a blade guard on Craftsman table saw, you must first unplug the saw and remove the old guard. Then, install the new guard and adjust it as needed before testing it for proper function. 

All the while, you must keep in mind, of course, all the intricacies awarded to a Craftsman Table Saw. And obviously, the Blade Guard will be important no matter the length or intensity of usage. After all, it helps prevent accidents by covering the blade and keeping fingers away from it.

Here, you’ll learn how to install a blade guard on a Craftsman table saw with a step-by-step guide. Or, you can also check out this owner’s manual if you want to look at something really specific: Craftsman 10-inch table saw owner manual.

On the other hand, if you’d like a complete overview and tutorial for a Craftsman table saw, we recommend this video:

Alternatively, check out this guide on “How to adjust DeWalt table saw fence?“

Step 1: Collect the Necessary Equipment

Before starting the installation process, gathering the necessary equipment is essential. Here are the items you’ll need:

• Replacement blade guard
• Screwdriver
• Wrench
• New mounting hardware (if required)
• Owner’s manual (for reference).

Step 2: Unplug Your Table Saw

Before you start working on your saw, ensuring it’s unplugged from the power source is crucial.

Learn more about table saw power requirements, too.

Step 3: Remove the Old Blade Guard

Once you’ve unplugged your Craftsman table saw, you can remove the old blade guard. Depending on the model of your saw, the guard may be attached with screws or bolts. Use your screwdriver or wrench to loosen the fasteners and remove the old guard.

Step 4: Install the New Blade Guard.

You can install the new one now that the old guard has been removed. Align the new guard with the mounting holes and secure it in place with mounting hardware. If the new guard doesn’t come with mounting hardware, reuse the old fasteners to secure the guard in place.

Step 5: Adjust the Guard

After installing the new guard, you must adjust it for proper positioning. Bring the blade guard close to the plate, enough that there is barely space left.

At this point, you can try adjusting and changing the height depending on what you need. You can also adjust the angle to improve your overall woodworking experience.

In fact, you can work to align the blade during this process as well. Learn more about blade alignment of a table saw here.

How To Install A Blade Guard On Craftsman Table Saw | The Testing

After adjusting the guard, testing it for proper function is essential. Reconnect the power supply and turn on the saw to ensure the guard moves freely.

And you’re done! A simple process of learning how to install a blade guard on Craftsman table saw.

Nevertheless, this was a guide for a Craftsman Table saw blade guard. If you’re looking for a more general understanding, we recommend checking this out:

FAQs

What are some Safety Measures to use when installing a new blade guard?

Here are some safety measures to follow when installing a new blade guard on a Craftsman table saw:

• Always unplug the saw before working on it.
• Wear protective gear.
• Handle the saw blade and guard with care to avoid injury.
• Follow the manufacturer’s instructions carefully when installing the new guard.
• Ensure the new guard is properly aligned and secured before testing it for function.
• Test the guard before using the saw to ensure it moves freely and doesn’t interfere with the blade.
• Always keep your hands and other body parts away from the saw blade, even when using a blade guard.
• Refer to the owner’s manual for additional safety precautions for your Craftsman table saw.

Do I really have to learn how to Install a Blade Guard on Craftsman Table Saw?

For safety reasons, learning how to install a blade guard on a Craftsman table saw is necessary. A blade guard helps prevent accidents by covering the saw blade and keeping fingers and other body parts away from it. Without a blade guard, the risk of injury while using the saw increases significantly.

Can I use a blade guard from a different saw model on my Craftsman table saw?

Using a blade guard from a different saw model on your Craftsman table saw is not recommended. Each saw is designed differently, and the blade guard may not fit properly or function correctly.

Can I adjust the blade guard for different types of cuts?

Yes, you can adjust the blade guard for different types of cuts. For example, you may need to adjust the height or angle of the guard for beveled cuts or dado cuts. Refer to your owner’s manual for instructions on how to adjust the blade guard for different types of cuts.

And if you’d like to learn about adjustment to better understand your table saw, check out our guides on adjusting table saws.

The Bottom Line

Installing a blade guard on your Craftsman table saw is important to ensure your safety. The process is easy and can be completed with the right equipment and patience!

However, safety should always be the top priority when working with power tools.

• Before installation, ensure you have the necessary protective gear. Secondly, the saw must be unplugged.
• Also take your time when removing the old guard and installing the new one. This will keep you safe and ensure the guard is properly aligned and secured.
• Finally, test the guard for proper function and adjust it as needed.

We hope you had fun learning!

Learn more table saw knowledge with “How much is a used table saw worth?”